Petroleum Engineers

  
Home | Petroleum engineering other to | Petroleum exploration engineer | Petroleum production engineeri
  Position：HOME>Petroleum refining engineering>Article Content
ASTM D 1160 to TBP conversion
Source：Internet Author：Unknow Pubdate：2008-04-15  
kmu (Chemical) 8 Feb 04 10:16
Hello,

I'm trying to convert ASTM D 1160 distillation to TBP curve using a spreadsheet. The ASTM standart says no matter the vacuum pressure report all results in AET (atmospheric equivalet temperature). So all the results I received are in AET. The procedure (actually the graphic) in API Data Book to convert ASTM D 1160 distillation to TBP is only from ASTM D 1160 at 10 mmHg to TBP. Since the results I have are in AET can I use the curve for ASTM D 86 which is atmospheric distillation? Any help is grately appreciated.

Thanx.


（Click：）

Previous：hydrogen plant deaerator   Next：refineries' plant inspection
[Add TO Favorites] [TOP] [PRINT] [CLOCE WINDOWS]  
  Hot Article
·auto ignition temperature
·What is a flatolet?
·Material selection for higher
·High TAN Crudes
·what is "thermosyphon&quo
·Kinematic Viscosity and Densit
·Nelson complexity index
·Pyrophoric Iron sulfide
·Nelson Farrar refinery cost in
·Good refining literature
·Simulation softwares
·Preservation procedure for the
  Related Articles
·refineries' plant inspection
·Sour water re-injection to top
·Leaking of Sweet Naphtha vapou
·Chlorides in Amine
·Leak testing of air cool and s
·DHT HPS Cement Liner
·Synthetic crude end-point
·cost of hydrogen production
·Jet sulphur level
·H2 compressor failure
·h2 unit cold collector heat lo
·codes and standards for layout
Power by DedeCms