|
2" SCHED 80 600 ANSI.Flange
|
|
Source：Internet Author：Unknow Pubdate：2010-03-03
|
|
pipelyer (Petroleum)
20 Feb 10 12:30
Is it within code to weld a 2" Weldneck flange directly to the top of pipe (nps 8") csa z662-07 Code
europipe (Chemical)
22 Feb 10 4:43
No
pipelyer (Petroleum)
22 Feb 10 10:12
More Info EuroPipe??
dcasto (Chemical)
22 Feb 10 12:34
You need a weld-o-let or a branch tee
europipe (Chemical)
23 Feb 10 5:24
Like dcasto says,
You need a piece of pipe(weld-in/on)or better a weldolet for a proper weld.
That's not possible with a grinded flange.
Greetings
字串8
zdas04 (Mechanical)
23 Feb 10 8:59
Take a look at the backside of a 2 inch flange, think there is room to put a welding rod in there when it is up against a pipe?
David
11echo (Petroleum)
2 Mar 10 15:25
I bet ya that if you look at the "branch table" in the piping spec.s it'll show you'll be using a weld-o-let on a 600# line.
（Click：）
|
| Previous：Spent caustic neutralization Next：Relief valve pressure used to stress and support calculations. |
|
[ Add TO Favorites]
[TOP] [PRINT]
[CLOCE WINDOWS] |
|
|
|
