Petroleum Engineers

 
Home | Petroleum exploration engineer | Petroleum production engineeri | Petroleum refining engineering
  Position:HOME>Petroleum engineering other to>Article Content
automated air wrench for open close manual operated valves
Source:Internet Author:Unknow Pubdate:2008-04-15  
ramjectb2 (Petroleum) 17 May 07 12:02
I'm looking for a device that is air actuated for maintenance to open and close a gate valve and then be able move to another gate valve. This device must be air operated and portable. Anyone?

unclesyd (Materials) 17 May 07 12:28
Here is one that we use from an old line company with good technical service.

http://www.wachsco.com/products/productstep1.php?category=Wachs%20Automated%20Valve%20Equipment%20(WAVE)


PS:

Several years ago they did give nice hats.

ramjectb2 (Petroleum) 17 May 07 13:37
Just what I was looking for.....Thanks

unclesyd (Materials) 17 May 07 22:32 字串3
Appreciate the heads up.

Here in Florida in mid-summer these thing are life savors when operating 20" chilled water valves.


(Click:

Previous:Pump manufacturers for small (500 l/min) fuel transfer pumps   Next:Physiacl Properties Aviation Fuel
[Add TO Favorites] [TOP] [PRINT] [CLOCE WINDOWS]  
  Hot Article
·Bulk Modulus for Jet A Fuel
·ASME B16.48 Steel Line Blanks
·Compressibility value of Jet A
·Modelling and simulation of ga
·Are there different grades of
·natural gas vs fuel oil
·Bulk Modulus of 98% Sulphuric
·Gas well testing training
·jet fuel specific heat vs. den
·Crude oil velocity in pipeline
·API 650 - Weld Spacing
·Pipe & Fittings
  Related Articles
·Physiacl Properties Aviation F
·Oil sample bottles - wash for
·Typical Deisel Generator Oil S
·Tanks overflow protection
·API 1102 - HIGHWAY AND RAILWAY
·New US Refinery - Since 1976?
·Fuel Pumping
·Airllock in fuel lines
·High Pressure - Low Pressure p
·HF vs. sulfuric for alkylation
·Opinion of Construction Cost A
·Do methanol tanks need to be c
Power by DedeCms