Petroleum Engineers

 
Home | Petroleum exploration engineer | Petroleum production engineeri | Petroleum refining engineering
  Position:HOME>Petroleum engineering other to>Article Content
Pump manufacturers for small (500 l/min) fuel transfer pumps
Source:Internet Author:Unknow Pubdate:2008-04-15  
caluna (Mechanical) 8 May 07 10:55
Loking for a pump: small fuel transfer pump for Jet A-1 fuel: aluminum impeller, 460 l/min @ 23 m head, for single single phase power. I know of Gormann-Rupp but they don't have the pump with aluminum impeller. I have not had much success with "> BigInch (Petroleum) 8 May 07 12:36
Don't know, but I did turn up this one.  If they don't have it maybe they know who does.
http://www.core-es.com/aviation-modules.htm BigInch-born in the trenches.
http://virtualpipeline.spaces.msn.com

caluna (Mechanical) 9 May 07 11:24
Thanks! Looks like a great site. I am contacting them. Heather


(Click:

Previous:impeller material for use with jet A-1 Fuel   Next:automated air wrench for open close manual operated valves
[Add TO Favorites] [TOP] [PRINT] [CLOCE WINDOWS]  
  Hot Article
·Bulk Modulus for Jet A Fuel
·ASME B16.48 Steel Line Blanks
·Compressibility value of Jet A
·Modelling and simulation of ga
·Are there different grades of
·natural gas vs fuel oil
·Bulk Modulus of 98% Sulphuric
·Gas well testing training
·jet fuel specific heat vs. den
·Crude oil velocity in pipeline
·API 650 - Weld Spacing
·Pipe & Fittings
  Related Articles
·automated air wrench for open
·Physiacl Properties Aviation F
·Oil sample bottles - wash for
·Typical Deisel Generator Oil S
·Tanks overflow protection
·API 1102 - HIGHWAY AND RAILWAY
·New US Refinery - Since 1976?
·Fuel Pumping
·Airllock in fuel lines
·High Pressure - Low Pressure p
·HF vs. sulfuric for alkylation
·Opinion of Construction Cost A
Power by DedeCms